Discounts

Single catch can kit for the Toyta 86/Scion FR-S/Subaru BRZ, 2012-2020. Interfaces with the crankcase vent hose to filter out oil and other contami...

Single catch can kit for the Toyta 86/Scion FR-S/Subaru BRZ, 2012-2020. Interfaces with the PCV valve hose to filter out oil and other contaminants...

PTFE submersible fuel tubing. 3/8" inside diameter, 8.2" overall length.

Kit to install an aftermarket fuel pump into the BMW E46 (non-M3). No pump included. User must supply their own pump.

This item allows the installation of an aftermarket fuel pump into the stock BMW fuel pump hanger. Pump not included.

PTFE submersible fuel tubing. 5/16" inside diameter, 8.2" overall length.

Plumbing kit to be used with the Radium ENgineering fuel rail for the Toyota 2JZ-GE engine. Retains factory returness system.

Fuel rail plumbing kit for 20-0866. Includes all necessary hoses and fittings.

Fuel rail set for the Huracan and R8 port injections system. Direct bolt-in installation with no modifications required to vehicle or engine. Plumb...

In-tank fuel surge tank. Provides extra fuel pump for port injection on the 5.2 V10 Audi engines.

This kit is needed when using Radium in-tank fuel pump hangers on any 2015-2021 Subaru WRX with the FA20 engine.

Stainless steel construction. Compatible with all fuel types. 5-bolt SAE standard pattern. 0-ohm empty, 90-ohm full.

Stainless steel fuel level sender for Radium fuel cells. 8" long. Suitable for Radium 6 gallon, 10 gallon and spare tire fuel cells.

Dual catch can kit for the 2005-2023 Toyota Tacoma. Oil catch cans interface with both the crankcase vent line and PCV line. Catch cans collect oil...

Refueling kit for Radium Engineering FCST Fuel Cells. Includes a swiveling fill neck, 1.5" hose (3ft long) and receptacle for mounting on the body.

Includes a short fill neck with a scew off cap and an 8AN size vent hose. A dump can is NOT included with this kit. For use with Radium Engineering...

Complete refueling kit includes 6 gallon fuel jug with dry break fitting, fender mounted dry break recepticle, and filler hose and fill neck. Compa...

Complete kit includes 6 gallon fuel jug, fender mounted filler point, fill hose and fuel filler neck. Compatible with Radium FCST fuel cells.

This fitting presses into the Nissan RB25DET valve cover and will work on either intake or exhause side. Presents a swiveling 10AN male fitting fo...

Press-in valve cover fitting for the Nissan S14/S15 SR20DET. Exhaust side. 10AN male connection.

Press in valve cover fittings for the Nissan S13 SR20DET (red and black top). Exhaust side. Double sided 10AN male connections.

Press-in fitting breather fitting for the Nissan KA24DE valve cover. 10AN male swivels 360 degrees. Stainless steel and aluminum construction.

Press-in swivel fitting with 12AN male. For use on the Nissan RB26DETT engine valve covers.

This stainless steel and aluminum fitting presses into the S14/S15 Nissan SR20DET valve cover on the intake side and replaces the PCV valve with a ...